|
Current Category
Sterilizer Cleaners
STERILIZER CLEANERS
Cleansliness in next to godliness in brewing
 |
Iodophor 250ml
Contains 250ml. Dilute 1:1000 to give a 12.5 ppm solution (i.e. 10ml per 10 liters the cap has a capacity of 10ml) When used at this concentration, no rinsing is required. Just air dry the equipment. Allow 20 min exposure to sanitize all equipment. Safe on all glasses, plastic copper and stainless steel equipment. Sanitizing effectiveness is gone when amber colour dissappears.
|
Price:
 |
|
Iodophor 1000ml
Contains 1000ml. Dilute 1:1000 to give a 12.5 ppm solution (i.e. 10ml per 10 liters the cap has a capacity of 10ml) When used at this concentration, no rinsing is required. Just air dry the equipment. Allow 20 min exposure to sanitize all equipment. Safe on all glasses, plastic copper and stainless steel equipment. Sanitizing effectiveness is gone when amber colour dissappears.
|
Price:
|
 |
Fermentor Keg & Line Cleaner 1000ml
Contains Sodium Hydroxide- For beer lines and dispensing equipment-Rinse out kegs, use 50ml of cleaner with 5 liters of water and shake keg. Leave in the beer lines for 30mins, pump through then rince keg and flush the system with 5 liters of water through tap or gun.
Fermenters- Rinse out fermenter, use 100ml to 25 liters of water. Leave for 8 hours then flush well with water. Contains 1liter.
|
Price:
|
 |
Sodium Metabisulphate 500gms
Use as a sanitizer for all equipment (fermenters, bottles) at a rate of 50 grams (2tablespoons) to 4 liters of cold water. As a bacterial inhibitor, add a tablespoon to the bottom of a clean dry fermenter and store all equipment with the lod on untill ready to brew. Contains 500gms.
|
Price:
|
Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant
|
|
